A small business can be better than a big business because of agility and adaptability due to their size and scale.
X-twitter Instagram Facebook-f Linkedin-in
Call us any time
682.404.1010

SERIES 3000 PANEL SYSTEM

STRUCTURAL SYSTEM FOR COMMERCIAL AND INSTITUTIONAL

3” STRUCTURAL AND ARCHITECTURAL MECHANICALLY SEAMED PANEL SYSTEM

Designed for heavy industrial and large commercial buildings with low slope, long panel runs and wide span structural requirements, Englert’s Series 3000T mechanically seamed, snap lock panel is noted for its durability and ruggedness. A major benefit of this profile is the ability to easily remove and replace damaged panels without uprooting an entire roof.

SYSTEM APPLICATIONS

  • Consists of a metal panel and seam cap
  • Heavy duty for commercial and industrial use
  • ½” / 12” minimum slope
  • Can be installed bi-directionally
  • Employs two beads of continuous applied hot melt sealant inside the seam cap during manufacturing

SUBSTRATES

  • 24 and 22 gauge steel
  • .032” and .040” aluminum

FINISHES

Englert’s Series 3000 system is available in a wide variety of
coatings and colors. See the Englert color card for our full
range of standard colors and paint system specifications.
Englert can match the color of virtually any material –
including brick, wood and fabric – with short lead times as
needed. Custom colors are available in quantities as low as
5,000 lbs. on steel or aluminum.

SYSTEM WARRANTIES

  • Galvalume Plus® – 25-year steel warranty on acrylic coated Galvalume®
  • PermaColor 3500 – 35-year/Low Gloss/ULTRA-Cool™ finish warranty on our Kynar 500®/Hylar 5000® coatings
  • PermaMetallic 3500 – 35-year/Low Gloss/ULTRA-Cool™ finish warranty on our Kynar 500®/Hylar 5000® coatings

RATINGS AND CERTIFICATIONS

  • ASTM-E-1646-95 water penetration tested
  • ASTM-E-1680-95 air infiltration tested
  • ASTM-E-2140 hydrostatic head test
  • ASTM-E-1592-98 uplift tested
  • Factory Mutual rated class 4471 (Model 3016)
  • Florida Building Code listed

Resources

Download PDF
Allowable Uniform Live Load (PSF)
Thickness No. of Spans 4’-6” 5’-0” 5’-6” 6’-0”
16” Width - Steel
24 ga. 3 or more 295 166 106 73
22 ga. 3 or more 379 213 136 94
16” Width - Aluminum
.032” 3 or more 117 66 42 29
.040” 3 or more 174 98 63 43
18” Width - Steel
24 ga. 3 or more 258 145 93 64
22 ga. 3 or more 332 186 119 83
18” Width - Aluminum
.032” 3 or more 102 57 37 25
.040” 3 or more 151 85 54 38
Note: Load values shown may be increased by 1/3 for allowable wind load.